Internal Rack Inverters, 6 Output, 180W.
Mains supply for rack ancilliary equipment.
'19 Inch' or ETSI rack sizes
48V or 24V Exchange Battery.
Floating input +Ve or Ve Earth systems.
All common output socket types available.
High efficiency conversion..
GENERAL. These economic inverters convert Exchange Battery voltage to 230V AC, for powering small equipment, Routers, Hubs, Data Loggers etc. All models have an output power of 180 watts shared across the six outlets. Output is either by standard UK 13A or Euro SHUKO or IEC (Kettle type) socket.
OUTPUT: 230V OR 115V AC RMS Nominal. Each output socket is limited to 30W though up to 60W from one socket is possible if the rest are not fully loaded. Call our help line should you require further explanation. 115V AC RMS are available.
BATTERY DRAIN: A figure of 0.5amp (24V input) and 0.25amp (48V input) for every 10 watts of output load is a good guide. Connection to the input on all models is via a pair of 6.3mm FastOn tabs with a separate grounding terminal for the case. The battery must be fused at source.
CAUTION: This adapter is supplied on the basis of the user determining the suitability for the purpose for which it is to be used. Total live to neutral load capacitance must not exceed 0.25uF per socket. Such capacitance is often found in mains filters which are best removed when equipment is run on an inverter driven system.
Models available:
230V AC OUTPUT  
Model No. 
Rack Type 
Socket Type  Battery  Output 
SM5260  ETSI (4N High).  6 x UK (13A)  48V  230V AC RMS, 30W Per Socket 
SM5261  ETSI (4N High).  6 x SHUKO  48V  230V AC RMS, 30W Per Socket 
SM5262  ETSI (4N High).  6 x IEC (Kettle)  48V  230V AC RMS, 30W Per Socket 
SM5264  19 Inch (2U+ High)  6 x UK (13A)  48V  230V AC RMS, 30W Per Socket 
SM5265  19 Inch (2U+ High)  6 x SHUKO  48V  230V AC RMS, 30W Per Socket 
SM5266  19 Inch (2U+ High)  6 x IEC (Kettle)  48V  230V AC RMS, 30W Per Socket 
SM5268  ETSI (4N High).  6 x UK (13A)  24V  230V AC RMS, 30W Per Socket 
SM5269  19 Inch (2U+ High)  6 x UK (13A)  24V  230V AC RMS, 30W Per Socket 
115V AC OUTPUT  
SM5340  ETSI (4N High).  6 x UK (13A)  48V  115V AC RMS, 30W Per Socket 
SM5341  ETSI (4N High).  6 x SHUKO  48V  115V AC RMS, 30W Per Socket 
SM5342  ETSI (4N High).  6 x IEC (Kettle)  48V  115V AC RMS, 30W Per Socket 
SM5344  19 Inch (2U+ High)  6 x UK (13A)  48V  115V AC RMS, 30W Per Socket 
SM5345  19 Inch (2U+ High)  6 x SHUKO  48V  115V AC RMS, 30W Per Socket 
SM5346  19 Inch (2U+ High)  6 x IEC (Kettle)  48V  115V AC RMS, 30W Per Socket 
SM5348  ETSI (4N High).  6 x UK (13A)  24V  115V AC RMS, 30W Per Socket 
SM5349  19 Inch (2U+ High)  6 x UK (13A)  24V  115V AC RMS, 30W Per Socket 

INPUT SPECIFICATION 


24V INPUT 
48V INPUT 
Battery: 
24V Nominal. 
48V Nominal. 
Voltage Range: 
2232V. 
43.264V. 
Current, No Load: 
0.3A Typical. 
0.2A typical. 
Current Drawn Per 10W Load 
0.5A. 
0.2A. 
OUTPUT SPECIFICATION  

230V AC 

Output Voltage: 
230V AC RMS plus or minus 10%. 

Frequency: 
50 Hz nominal, 4853Hz. or 60Hz nominal, 5863Hz. 

Power, Nominal: 
180W total, 30W per socket (Any one socket rated 60W if under total limit). 

Power, Short Term: 
200 Watts for 2 minutes. 

Max Capacitive Load: 
0.25uF direct Live to Neutral capacitance PER SOCKET 

Output Wave Form: 
Quasi sine wave (stepped square wave). 

Protection: 
Current and temperature limited. External fuse required. 




115V AC  
Output Voltage: 
115V AC RMS plus or minus 10%. 

Frequency: 
50 Hz nominal, 4853Hz. or 60Hz nominal, 5863Hz. 

Power, Nominal: 
180W total, 30W per socket (Any one socket rated 60W if under total limit). 

Power, Short Term: 
200 Watts for 2 minutes. 

Max Capacitive Load: 
0.5uF direct Live to Neutral capacitance PER SOCKET. 

Output Wave Form: 
Quasi sine wave (stepped square wave). 

Protection: 
Current and temperature limited. External fuse required. 





GENERAL 

Size: 
ETSI or 19" Standard wide x 80mm high x 10mm depth . 

Weight: 
190g. 

Storage Temperature: 
40 to +70C. 

Storage Temperature:  20 to +55C. 